Loading devices…

Local control: Confirmed on this route
Cloud account: Required
Device bridge: Not required
Matter route: Reviewed

Use the exact US Tapo P110M and its Matter setup code.
The device needs 2.4 GHz Wi-Fi; enable IPv6 on the home network. Setup can appear successful yet later control can fail without IPv6.
Set up a compatible hub in the same Google Home, such as Nest Mini or Nest Audio. Check Google’s current hub list.
Use the latest Google Home app and its direct Matter setup path. This guide does not use vendor cloud linking.
Sign into Google Home. Direct Matter commissioning is documented; a Tapo account is not a prerequisite of this specific setup path.
Use BLE 4.2 or later with Android 8.1+ and Play services 22.48.14+, or iOS 16.5+. Enable Bluetooth for pairing.

Matching guide: Home Assistant

Home Assistant via TP-Link (US Wi-Fi)

Local control: Confirmed on this route
Cloud account: Conditional or not verified
Device bridge: Not required
Matter route: Reviewed

Use the exact Tapo P110M with its Matter commissioning code.
Connect the plug to 2.4 GHz Wi-Fi. Keep the phone, Matter server and device on a LAN that permits IPv6 and Matter discovery; follow the official network troubleshooting instructions.
This guide uses Home Assistant OS, the supported installation for the official Matter Server app.
Install the built-in Matter integration and official Matter Server app.
This path commissions the plug directly with its Matter code through the Home Assistant Companion app. The manufacturer documents direct Matter-app setup; vendor app provisioning is a separate alternative.
Use a supported Android or iOS phone with the Home Assistant Companion app and Bluetooth enabled for commissioning. Bluetooth is for setup, not ongoing control.

Matching guide: Home Assistant

Local control: Confirmed on this route
Cloud account: Required
Device bridge: Not required
Matter route: Not established

Use the exact Tapo P110M model. Home Assistant lists model support; hardware/firmware examples are additional context, not universal minimum-version requirements. Check your installed firmware and the documented third-party setting.
Connect the plug to 2.4 GHz Wi-Fi and allow local communication with Home Assistant.
Use a working Home Assistant installation.
Add the built-in TP-Link Smart Home integration. This guide uses the local TP-Link route.
Provide the TP-Link cloud email and password used with the device. Local communication does not remove this authentication requirement.
Check Tapo Lab > Third-Party Compatibility in the Tapo app. Some firmware requires this setting to permit Home Assistant access.

Wi-FiMatter

Amazon AlexaGoogle HomeApple Home / HomeKitHome Assistant

A Tapo Matter-over-Wi-Fi plug with documented energy monitoring. Connection requirements and exposed readings depend on the selected ecosystem, hardware and firmware.

Energy monitoring: Yes
Outlets: 1

More device details

USB ports: 0
Outdoor: No

Recorded scores: Overall 8.2/10 · Value 9.2/10

Recorded price$13.99

View at Amazon

Tapo (TP-Link)

active

Tapo Smart Plug Mini (Matter)

P125M · Smart Plugs

Matching guide: Google Home

Local control: Confirmed on this route
Cloud account: Required
Device bridge: Not required
Matter route: Reviewed

Use the exact US Tapo P125M and its Matter setup code.
The device needs 2.4 GHz Wi-Fi; enable IPv6 on the home network. Setup can appear successful yet later control can fail without IPv6.
Set up a compatible hub in the same Google Home, such as Nest Mini or Nest Audio. Check Google’s current hub list.
Use the latest Google Home app and its direct Matter setup path. This guide does not use vendor cloud linking.
Sign into Google Home. Direct Matter commissioning is documented; a Tapo account is not a prerequisite of this specific setup path.
Use BLE 4.2 or later with Android 8.1+ and Play services 22.48.14+, or iOS 16.5+. Enable Bluetooth for pairing.

Matching guide: Home Assistant

Home Assistant via TP-Link (US Wi-Fi)

Local control: Confirmed on this route
Cloud account: Conditional or not verified
Device bridge: Not required
Matter route: Reviewed

Use the exact Tapo P125M with its Matter commissioning code.
Connect the plug to 2.4 GHz Wi-Fi. Keep the phone, Matter server and device on a LAN that permits IPv6 and Matter discovery; follow the official network troubleshooting instructions.
This guide uses Home Assistant OS, the supported installation for the official Matter Server app.
Install the built-in Matter integration and official Matter Server app.
This path commissions the plug directly with its Matter code through the Home Assistant Companion app. The manufacturer documents direct Matter-app setup; vendor app provisioning is a separate alternative.
Use a supported Android or iOS phone with the Home Assistant Companion app and Bluetooth enabled for commissioning. Bluetooth is for setup, not ongoing control.

Matching guide: Home Assistant

Local control: Confirmed on this route
Cloud account: Required
Device bridge: Not required
Matter route: Not established

Use the exact Tapo P125M model. Home Assistant lists model support; hardware/firmware examples are additional context, not universal minimum-version requirements. Check your installed firmware and the documented third-party setting.
Connect the plug to 2.4 GHz Wi-Fi and allow local communication with Home Assistant.
Use a working Home Assistant installation.
Add the built-in TP-Link Smart Home integration. This guide uses the local TP-Link route.
Provide the TP-Link cloud email and password used with the device. Local communication does not remove this authentication requirement.
Check Tapo Lab > Third-Party Compatibility in the Tapo app. Some firmware requires this setting to permit Home Assistant access.

Wi-FiMatter

Amazon AlexaGoogle HomeApple Home / HomeKitHome Assistant

A compact Tapo Matter-over-Wi-Fi plug. Home Assistant can use either direct Matter commissioning or the local TP-Link integration; account and controller requirements differ by path.

Energy monitoring: No
Outlets: 1

More device details

USB ports: 0
Outdoor: No

Recorded scores: Overall 7.8/10 · Value 9.4/10

Official product information

Recorded priceNot recorded

Tapo US (official product information)

Home Assistant via Matter Wi-Fi: Matter-enabled firmware only (documentation reviewed)

Leviton

active

Decora Smart Wi-Fi Decora Smart Matter Plug

D215P-1RW · Smart Plugs

Matching guide: Home Assistant

Local control: Confirmed on this route
Cloud account: Conditional or not verified
Device bridge: Not required
Matter route: Reviewed

Use only the exact US D215P-1RW with Matter-enabled firmware already installed and a valid Matter setup code. A legacy HomeKit QR code is not the Matter code.
This guide begins after Matter has been enabled on the actual unit. It does not cover firmware conversion or assume a retail unit is Matter-ready. If Matter readiness or the code cannot be confirmed, stop and follow current manufacturer guidance.
Use 2.4 GHz Wi-Fi on the Home Assistant LAN/VLAN with working IPv6 and mDNS multicast. Internet IPv6 is unnecessary.
Use current Home Assistant OS on a supported 64-bit host.
Install the Matter integration and official Matter Server app; Home Assistant supplies the Matter controller.
For this already Matter-enabled direct-commissioning path, the manual permits Matter without My Leviton. A My Leviton account/app is needed for its separate documented legacy-upgrade path or chosen vendor-cloud setup.
Use a currently supported Android/iOS Companion app with Bluetooth enabled, near the plug. Follow current app permission requirements.
Follow each load-specific rating in the manual; general-use current is 15 A at 120 VAC. Do not use for high-power heating appliances, including portable heaters. Use a non-switched receptacle and observe all manual restrictions.

Indoor 120 V Wi-Fi plug-in switch for lamps and supported small appliances. Rated 15 A general use, 5 A LED/CFL and 1500 W incandescent/halogen. Matter may require a firmware update through My Leviton and a compatible Matter controller; the native My Leviton Wi-Fi connection does not require a separate Leviton hub.

Energy monitoring: No
Outlets: 1

More device details

USB ports: 0
Outdoor: No

Recorded priceNot recorded

Tapo (TP-Link)

active

Tapo P210M

P210M · Smart Outlets

Matching guide: Google Home

Local control: Confirmed on this route
Cloud account: Required
Device bridge: Not required
Matter route: Reviewed

Use the exact US Tapo P210M and its Matter setup code.
The device needs 2.4 GHz Wi-Fi; enable IPv6 on the home network. Setup can appear successful yet later control can fail without IPv6.
Set up a compatible hub in the same Google Home, such as Nest Mini or Nest Audio. Check Google’s current hub list.
Use the latest Google Home app and its direct Matter setup path. This guide does not use vendor cloud linking.
Sign into Google Home. Direct Matter commissioning is documented; a Tapo account is not a prerequisite of this specific setup path.
Use BLE 4.2 or later with Android 8.1+ and Play services 22.48.14+, or iOS 16.5+. Enable Bluetooth for pairing.
Have the outlet installed according to the exact US guide, with line, neutral and ground, before commissioning. It is for indoor dry locations. Consult a qualified electrician when unsure; use the guide for electrical installation.

Matching guide: Home Assistant

Local control: Confirmed on this route
Cloud account: Conditional or not verified
Device bridge: Not required
Matter route: Reviewed

Use the exact Tapo P210M with its Matter commissioning code.
Connect the outlet to 2.4 GHz Wi-Fi. Keep the phone, Matter server and device on a LAN that permits IPv6 and Matter discovery; follow the official network troubleshooting instructions.
This guide uses Home Assistant OS, the supported installation for the official Matter Server app.
Install the built-in Matter integration and official Matter Server app.
This path commissions the outlet directly with its Matter code through the Home Assistant Companion app. The manufacturer documents direct Matter-app setup; vendor app provisioning is a separate alternative.
Use a supported Android or iOS phone with the Home Assistant Companion app and Bluetooth enabled for commissioning. Bluetooth is for setup, not ongoing control.
Have the outlet installed according to the exact US guide, with line, neutral and ground, before commissioning. It is for indoor dry locations. Consult a qualified electrician when unsure; use the guide for electrical installation.

Wi-FiMatterBluetooth

Amazon AlexaGoogle HomeApple Home / HomeKitSmartThings

An in-wall Matter-over-Wi-Fi outlet with two separately controlled receptacles and Tapo energy monitoring. It requires a neutral wire and qualified installation. Matter setup needs a controller for the chosen ecosystem.

More device details

Official product information

Recorded priceNot recorded

Tapo US (official product information)

Tapo (TP-Link)

active

Tapo P400M

P400M · Outdoor Smart Plugs

Matching guide: Google Home

Local control: Confirmed on this route
Cloud account: Required
Device bridge: Not required
Matter route: Reviewed

Use the exact US Tapo P400M and its Matter setup code.
The device needs 2.4 GHz Wi-Fi; enable IPv6 on the home network. Setup can appear successful yet later control can fail without IPv6.
Set up a compatible hub in the same Google Home, such as Nest Mini or Nest Audio. Check Google’s current hub list.
Use the latest Google Home app and its direct Matter setup path. This guide does not use vendor cloud linking.
Sign into Google Home. Direct Matter commissioning is documented; a Tapo account is not a prerequisite of this specific setup path.
Use BLE 4.2 or later with Android 8.1+ and Play services 22.48.14+, or iOS 16.5+. Enable Bluetooth for pairing.

Matching guide: Home Assistant

Local control: Confirmed on this route
Cloud account: Conditional or not verified
Device bridge: Not required
Matter route: Reviewed

Use the exact Tapo P400M with its Matter commissioning code.
Connect the plug to 2.4 GHz Wi-Fi. Keep the phone, Matter server and device on a LAN that permits IPv6 and Matter discovery; follow the official network troubleshooting instructions.
This guide uses Home Assistant OS, the supported installation for the official Matter Server app.
Install the built-in Matter integration and official Matter Server app.
This path commissions the plug directly with its Matter code through the Home Assistant Companion app. The manufacturer documents direct Matter-app setup; vendor app provisioning is a separate alternative.
Use a supported Android or iOS phone with the Home Assistant Companion app and Bluetooth enabled for commissioning. Bluetooth is for setup, not ongoing control.

Wi-FiMatterBluetooth

Amazon AlexaGoogle HomeApple Home / HomeKitSmartThings

An outdoor Matter-over-Wi-Fi plug with two separately controlled outlets and an IP65 rating. It supports Tapo schedules and Away Mode. Matter setup needs a controller for the chosen ecosystem.

Energy monitoring: No
Outlets: 2

More device details

USB ports: Not recorded
Outdoor: Yes

Recorded priceNot recorded

View official store

Tapo US (official store)

Home Assistant via native Matter over Thread

TIMMERFLOTTE Temperature/Humidity Sensor

IKEA

active

TIMMERFLOTTE Temperature/Humidity Sensor

506.189.57 · Temperature & Humidity Sensors

Matching guide: Home Assistant

Local control: Confirmed on this route
Cloud account: Conditional or not verified
Device bridge: Not required
Matter route: Reviewed

Scope is IKEA TIMMERFLOTTE US article 506.189.57. Manufacturer technical type E2314.
Sensor uses Matter over Thread, not direct Wi-Fi. Keep IPv6/mDNS working between border router and HA; IPv6 internet service is not required.
Use current supported 64-bit Home Assistant OS with its official Matter Server app.
Install Matter integration and connect its Matter Server. Thread integration alone is not the sensor entity integration.
At least one compatible Thread border router is mandatory on the home network. A Zigbee-only radio/configuration is not sufficient. DIRIGERA is an example, not the only option for this HA route.
Use a supported Android/iPhone with current Home Assistant Companion app and Bluetooth; keep it near the sensor and border router during setup.
Synchronize the intended Thread network credentials to the commissioning phone using official HA/phone-platform instructions.
Keep the unique device QR/numeric code. If already commissioned, obtain a sharing code from the existing controller instead of routine factory reset.
Direct Matter instructions do not include IKEA-account onboarding. Mobile platform and border-router onboarding can add account requirements; this is not a universal account-free promise.
Indoor wall placement using rear keyhole screw mount; choose screw/anchor suited to wall. Manual limits mounting height to 2 m.

ThreadMatter

Indoor battery-powered temperature and humidity sensor with a press-to-view display and Matter over Thread. Uses two separately sold AAA HR03 batteries.

Motion: Not recorded
Occupancy: Not recorded

More device details

Light sensor: Not recorded

Recorded priceNot recorded

View official store

IKEA US — TIMMERFLOTTE 506.189.57

Home Assistant via native Matter over Thread

IKEA

active

MYGGBETT Door/Window Sensor

606.176.41 · Door & Window Sensors

Matching guide: Home Assistant

Local control: Confirmed on this route
Cloud account: Conditional or not verified
Device bridge: Not required
Matter route: Reviewed

Scope is IKEA MYGGBETT US article 606.176.41. Shared manual covers E2492 and E2705; exact shipping revision is unresolved, so only common specifications are used.
Sensor uses Matter over Thread, not direct Wi-Fi. Keep IPv6/mDNS working between border router and HA; IPv6 internet service is not required.
Use current supported 64-bit Home Assistant OS with its official Matter Server app.
Install Matter integration and connect its Matter Server. Thread integration alone is not the sensor entity integration.
At least one compatible Thread border router is mandatory on the home network. A Zigbee-only radio/configuration is not sufficient. DIRIGERA is an example, not the only option for this HA route.
Use a supported Android/iPhone with current Home Assistant Companion app and Bluetooth; keep it near the sensor and border router during setup.
Synchronize the intended Thread network credentials to the commissioning phone using official HA/phone-platform instructions.
Keep the unique device QR/numeric code. If already commissioned, obtain a sharing code from the existing controller instead of routine factory reset.
Direct Matter instructions do not include IKEA-account onboarding. Mobile platform and border-router onboarding can add account requirements; this is not a universal account-free promise.
Indoor door/window sensor and magnet; adhesive-strip mounting documented. Follow illustrated alignment and <5 mm gap, leave access to release catch; maximum mounting height 2 m. Screw-related alternative appears in diagram but precise included fastener inventory is not asserted.

ThreadMatter

Indoor battery-powered door/window contact sensor with Matter over Thread. Uses one separately sold AAA HR03 battery. Exact US article 606.176.41; the shared manual covers E2492/E2705 without identifying the shipping hardware revision.

Motion: Not recorded
Occupancy: Not recorded

More device details

Light sensor: Not recorded

Recorded priceNot recorded

View official store

IKEA US — MYGGBETT 606.176.41

Home Assistant via native Matter over Wi-Fi

Cync Full Color Direct Connect A19 Matter Smart Bulb

Cync (GE Lighting)

active

Cync Direct Connect Cync Full Color Direct Connect A19 Matter Smart Bulb

93131732 · Smart Bulbs

Matching guide: Home Assistant

Local control: Confirmed on this route
Cloud account: Conditional or not verified
Device bridge: Not required
Matter route: Reviewed

Use Cync US SKU 93131732 / CLEDA199CD1MS/MSS-1T with its printed Matter logo and unique setup code. Older non-Matter Cync bulbs are outside this route.
Bulb uses Matter over 2.4 GHz Wi-Fi. Keep bulb, phone and HA on the same suitable LAN; permit local IPv6/mDNS multicast. IPv6 internet service is not required. VLAN/client isolation can prevent setup or control.
Use current supported 64-bit Home Assistant OS with the official Matter Server app. This is required infrastructure even though Cync-app marketing says no hub.
Add the built-in Matter integration and connect the Matter Server. This is not a custom Cync integration or a Cync cloud-link route.
Direct Matter instructions do not require Cync-app onboarding; keep that mutually exclusive mode separate. Home Assistant login and phone-platform provisioning still apply; official Android guidance calls for regular Google-account Android. Do not label the product universally account-free.
Use a supported Android/iPhone with latest Home Assistant Companion app and Bluetooth enabled near the bulb. For Android follow current Google Play services/location permission requirements. Phone Bluetooth is for setup, not the ongoing Matter transport.
Retain the unique QR or 11-digit setup code on the device sticker. For an already commissioned Matter device, obtain a sharing code from its current controller rather than assuming the original code works again.
Cync states that Cync-app and direct Matter setup cannot coexist. This guide starts with a new or otherwise ready-to-commission Matter bulb. A Cync-app-only device is not already Matter-connected; follow manufacturer-supported reset/recommissioning guidance before switching modes. Do not confuse a Cync-cloud voice link with direct Matter.
Install in an indoor medium-base fixture at 120 V, using ordinary on/off power rather than a mechanical dimmer. Leave supply on for smart control. Enclosed fixtures are not recommended. Damp/wet rating is unknown.

Wi-FiMatterBluetooth

Indoor E26 A19 full-color and tunable-white smart bulb, rated 800 lumens and 9.5 W at 120 V. Supports direct Matter over 2.4 GHz Wi-Fi or separate Cync-app setup.

More device details

View at Best Buy — Cync 93131732 (one bulb)

Recorded priceNot recorded

Product photo permission under review

Lutron

active

Caseta Caseta Plug-In Lamp Dimmer (White)

PD-3PCL-WH · Smart Plugs

Matching guide: Home Assistant

Home Assistant via Lutron Caseta Smart Hub

Local control: Confirmed on this route
Cloud account: Required
Device bridge: Required
Matter route: Not established

Use exact White US PD-3PCL-WH, UPC 784276072069; base PD-3PCL. Technical manuals apply via the primary identity mapping, not by counting kits/finishes as more devices.
120 V AC 50/60 Hz indoor only. Use up to two lamps controlled together: total 100 W compatible dimmable LED/CFL or 300 W incandescent/halogen, reduced by the mixed-load table. Minimum 10 W incandescent/halogen or one approved LED. No motors or transformer-supplied appliances. Leave lamp switches on and power the dimmer continuously.
Dimmer talks Clear Connect RF to the hub; hub connects by Ethernet. Home Assistant needs local network reachability. The plug is not directly joined to Wi-Fi or Thread.
A running Home Assistant instance on a network that can reach the supported Lutron hub.
Current integration lists Caseta hubs and supports wall and plug-in dimmers as light entities. This is documentation-backed compatibility, not a physical test.
Use L-BDG2-WH, or supported L-BDGPRO2-WH. Hub sold separately. PRO is not required merely for the documented built-in HA route. Do not substitute L-BDG1 based on generic Smart Bridge wording.
New hub activation requires a new or existing Lutron account, current Lutron app and Internet. A later local HA path does not remove these onboarding requirements. Existing correctly commissioned hubs need not be recreated.
For new hub commissioning use an iOS/Android device with the current Lutron app on the same network. Do not treat 2019 mobile-OS minima as current support.

ClearConnect (Lutron)

Indoor 120 V plug-in lamp dimmer controlling up to two lamps together: 100 W combined compatible dimmable LED/CFL or 300 W incandescent/halogen, with a mixed-load table. Local buttons work standalone; Home Assistant control uses a supported Lutron Caseta hub.

Energy monitoring: Not recorded
Outlets: 2

More device details

USB ports: Not recorded
Outdoor: No

Recorded priceNot recorded

Home Assistant on/off via Lutron Caseta hub

Photo coming soon

Lutron

active

Caseta Caseta Outdoor Smart Plug (Black)

PD-15OUT-BL · Outdoor Smart Plugs

Matching guide: Home Assistant

Local control: Not confirmed on this route
Cloud account: Required
Device bridge: Required
Matter route: Not established

US black single-device outdoor on/off plug; UPC 784276284813.
Use a GFCI-protected circuit; keep the cord end at least 3 inches above ground; extension cords must be rated at least 15 A. Equipment must be visible from every control location and be suitable for the exact approved load class. Do not operate motorized gates, garage doors, industrial doors, microwave ovens, heating pads, fireplaces or space heaters; these are non-exhaustive manufacturer examples. Respect local/national codes and the exact manual. Separate limits are 15 A lighting, 1/2 HP motors/pumps and printed 1200 VA (8 A) transformers/magnetic ballasts; no generic maximum is substituted.
Clear Connect Type A connects the plug to Lutron hub; hub Ethernet connects to a reachable local network.
Running Home Assistant on a network reaching the supported Lutron hub.
Use one supported hub: L-BDG2-WH or L-BDGPRO2-WH, sold separately. Exact plug specification supports Smart Bridge/PRO and current HA docs explicitly list these models. No first-generation hub route is asserted.
A new hub needs current Lutron app, Lutron account and active Internet. Existing working hubs do not need reset.
Current stable HA 2026.10.2 pins pylutron-caseta 0.29.0. Maintainer-merged PD-15OUT support identifies OutdoorPlugInSwitch, retained in the pinned switch-domain list; HA builds SwitchEntity instances from that domain. Exact US PD-15OUT-BL support follows this combined identity/source chain, not a physical test. See ha-mapping-evidence.json for pinned commits and locators.

ClearConnect (Lutron)

Single-outlet outdoor on/off plug for suitable lighting, motors/pumps and transformer loads within their separate manufacturer ratings. Home Assistant control uses a supported Lutron Caseta hub; safe-load and visible-from-every-control-location restrictions still apply.

Energy monitoring: Not recorded
Outlets: 1

More device details

USB ports: Not recorded
Outdoor: Yes

Recorded priceNot recorded