Getting specifications, connection paths, and resources ready.
Model: PD-6WCL-WH · white
No-neutral US lighting dimmer: up to 150 W compatible dimmable LED/CFL or 600 W incandescent/halogen when unganged. Incandescent/halogen limits reduce to 500 W at a gang end or 400 W in the middle. Multi-location control uses Pico remotes, not a conventional mechanical three-way companion. Smart integration requires a compatible Lutron hub.
Catalog-level details. Controllers, bridges, accounts, and available features depend on the connection route.
Confirm the exact variant before choosing. Store prices and availability can change; product-information pages are not store offers.
Hub required for smart features
Read the limitationsWhat to know about this device before choosing a connection.
Recorded catalog fit tags; check the route requirements before treating this as a match.
White variant. Amazon listing states support for up to 150W dimmable LED/CFL or 600W incandescent/halogen, no neutral required, and hub-required smart features. Compatible 3-way setup requires Pico remote. Manufacturer documentation review, 2026-10-18: The preceding Amazon-based note is retained as historical evidence, not a current stock or price assertion. Exact US White model PD-6WCL-WH is mapped separately from Canadian, retail-package and multipack suffixes. Supply: 120 V AC, 50/60 Hz. No neutral required. Compatible dimmable LED/CFL limit is 150 W combined; incandescent/halogen is 600 W unganged, 500 W at gang end, 400 W in gang middle. Mixed lamp types require the manual mixed-load table, not addition of maximum ratings. Minimum incandescent/halogen load is 25 W; minimum LED is one compatible bulb, not a universal wattage. Permanently installed lighting only: not receptacles, motors or transformer-supplied appliances. The old generic 1.3 A rating is unsupported and cleared; generic 600 W is also cleared to prevent an unqualified general-load rating, while typed incandescent/LED ratings remain. Three-way means Pico wireless control with the proper wallbox adapter and manufacturer wiring instructions, not mechanical companion compatibility. Disconnect circuit power before electrical work and follow the exact instructions; consult a qualified electrician when uncertain. Retained quick-start 0301729 Rev B (copyright 2014) remains linked by the official product page; specification 369987m is dated April 1, 2024. Documentation review, not physical-device testing. No hardware revision, universal bulb compatibility, stock or certification verdict inferred.
Check your ecosystem, then choose a connection method for its requirements and available controls.
A listed ecosystem is a starting point. Connection methods and exposed capabilities must be checked for the exact variant.
Reviewed guide
A documented connection is available. Check its equipment, account, firmware and feature requirements.
Home Assistant via Lutron Caseta Smart HubNo verified evidence yet
Compatibility has not been established for this exact model. This does not mean it is incompatible.
No verified evidence yet
Compatibility has not been established for this exact model. This does not mean it is incompatible.
No verified evidence yet
Compatibility has not been established for this exact model. This does not mean it is incompatible.
No verified evidence yet
Compatibility has not been established for this exact model. This does not mean it is incompatible.
No verified evidence yet
Compatibility has not been established for this exact model. This does not mean it is incompatible.
No verified evidence yet
Compatibility has not been established for this exact model. This does not mean it is incompatible.
Missing documentation does not mean a device is incompatible. Reviewed documentation is not a physical hardware test.
Basic controls on the reviewed connection. Setup, remote access, voice services and firmware updates have separate requirements.
PD-6WCL-WH · US · Documentation reviewed. Check the unit’s hardware and firmware before setup.
Documented controls may have firmware or configuration conditions. Read the guide before relying on a feature.
Open setup guideInstallation & device requirements · Manuals & resources · All connection details
Choose a documented method. Requirements, controls, local/cloud behavior, and evidence stay attached to that route.
Home Assistant · US · PD-6WCL-WH
Documentation reviewed · 10/19/2026. Not tested on physical hardware.
Lutron PD-6WCL-WH
To Lutron Smart Hub L-BDG2-WH
Compare the documented support source and effort for each route. Official/community support and local/cloud operation are separate questions.
Uses Home Assistant’s documented Lutron Caseta integration, not a custom component.
Check status & evidenceRequires an installed dimmer, Ethernet-connected hub, vendor-app onboarding and HA integration setup; electrical installation is outside this connection guide.
Check status & evidenceChoose a connection method for its app, account and controller requirements. An app used by one method is not necessarily required for every connection.
Controllers for the reviewed connections are listed below. These requirements do not apply automatically to other setup methods.
Hubs listed in the catalog:
Setup and software downloads have separate requirements from everyday local control. A completely offline setup has not been established by these summaries.
Requirements apply to this setup method.
Hub onboarding uses Lutron account/app/Internet, then the dimmer is added to that hub and HA is connected locally.
Check evidenceUse a running Home Assistant host with local access to the hub.
Check evidenceAdd Lutron Caseta in Home Assistant. This route does not use Matter or HomeKit commissioning.
Check evidenceNew hub activation requires a new or existing Lutron account and Internet. Local everyday HA control is a separate phase, not a claim of account-free onboarding.
Check evidenceThis path selects the standard L-BDG2-WH, explicitly supported by Home Assistant. It does not require a PRO hub.
Check evidenceExpand a group to see all recorded attributes. Electrical maxima depend on load type; check operating and installation limits in the exact model documentation. Route-specific feature availability can differ. Missing fields are not a confirmed “No.”
Readings available to your smart-home system depend on the connection. Check readings by connection
Check the model, region, hardware revision, and document version. Connection-specific sources are linked in each guide.
Reviewed documentation, catalog records, and manufacturer observations have different scopes. A source for one capability does not establish every feature.
Connection guides preserve source dates, publishers, review status, and claim-level links. “Documentation reviewed” does not mean tested on physical hardware.
Documentation reviewed Oct 19, 2026 · PD-6WCL-WH · US
Other active devices in this category. Their connection requirements and capabilities may differ.
RRD-6ND-WH · Smart Dimmers
VZM31-SN · Smart Dimmers
Lutron Smart Hub L-BDG2-WH
Local Ethernet/IP network
To Home Assistant
Home Assistant
Complete the required items before setup. Items marked “Not required” are optional for this route.
Documented
Use the installed US PD-6WCL-WH. Manufacturer model/color mapping identifies the White variant; Canadian -C and kit/retail variants are outside this scope.
Derived from documentation
The dimmer reaches the hub over Clear Connect RF. The hub connects by Ethernet to the LAN; Home Assistant must reach it locally. This is not direct device Wi-Fi.
Documented
Use a running Home Assistant host with local access to the hub.
Documented
Add Lutron Caseta in Home Assistant. This route does not use Matter or HomeKit commissioning.
Documented
New hub activation requires a new or existing Lutron account and Internet. Local everyday HA control is a separate phase, not a claim of account-free onboarding.
Documented
This path selects the standard L-BDG2-WH, explicitly supported by Home Assistant. It does not require a PRO hub.
Documented
For activation, use the current Lutron app on iOS or Android, with the phone/tablet and hub on the same network.
Documented
Start after safe installation under the exact manufacturer instructions. Disconnect power at the breaker before installation work; use only permitted permanently installed dimmable lighting, not outlets, motors or transformer-supplied appliances.
Documented
Connect hub Ethernet and power, let any update finish, then follow the Lutron app discovery prompts and press the rear button when requested. Skip activation if the existing hub is already correctly set up.
Derived from documentation
In the Lutron app choose Settings > Add Device, follow its prompts and confirm dimming works there before proceeding. Do not factory-reset a working installation as a routine setup step.
Documented
Use the discovered hub or Settings > Devices & services > Add Integration > Lutron Caseta; follow the on-screen instructions.
Derived from documentation
Check HA on/off and several brightness levels, then operate the wall buttons and verify state updates before depending on automations. This is a recommended check, not a hardware result.
Derived from documentation
PD-6WCL is a wall dimmer; HA documents wall dimmers as light entities, whose actions include on/off. Exact-model exposure is a combined-documentation inference.
Derived from documentation
Manufacturer dimming and HA dimmable-light support establish expected brightness control, not color control or guaranteed performance with every bulb. No hardware test was performed.
Documented
The dimmer has local on/off and brighter/darker controls. Its FASS service switch is documented separately; it is not a substitute for disconnecting the breaker before installation.
Not yet verified
Power telemetry exposed through this route was not established.
Not yet verified
Energy telemetry exposed through this route was not established.
Derived from documentation
Hub onboarding uses Lutron account/app/Internet, then the dimmer is added to that hub and HA is connected locally.
Documented
Home Assistant explicitly classifies the Lutron Caseta integration as Local Push. This is its documented integration classification, not a physical-device or interoperability test. Initial account/app/Internet requirements remain separate.
Derived from documentation
Accessing HA from outside the LAN requires separately configured remote access; Lutron-app remote features are not proof that HA remote access is configured.
Derived from documentation
HA can automate its light entities. Reliability depends on the running host and each trigger/action dependency; external services may add Internet dependence.
Documented
Lutron pushes hub updates and the app may require one during setup. Hub updates require Internet. This does not establish PD-6WCL dimmer-update delivery.
Documented
ui_or_documented_manual_certificates
Keep physical access to the hub for pairing. HA also documents a manual account-login/certificate method and reuse of existing certificates. Protect private keys; this review performs no pairing or credential generation.
Derived from documentation
not_matter
Do not look for a Matter/Thread setup code for this route. The HomeKit code shown in Lutron onboarding belongs to an optional, different integration.
Not yet verified
No minimum dimmer firmware, hub firmware, HA release or mobile-OS version was established for this exact route. Use current supported app/platform releases; a minimum must not be invented.
Not yet verified
No reviewed source established a user-update method or firmware delivery mechanism for PD-6WCL-WH.
Not yet verified
L-BDG1 compatibility with this Home Assistant path was not established. Do not substitute it for the selected L-BDG2-WH.
Documented
L-BDGPRO2-WH
Home Assistant also lists L-BDGPRO2-WH; it is not required by the standard-hub route selected here.
Documented
US
Visible US manufacturer ordering scheme plus WH = White establishes PD-6WCL-WH. Hardware revision remains unspecified.
Documented
Uses Home Assistant’s documented Lutron Caseta integration, not a custom component.
Derived from documentation
Requires an installed dimmer, Ethernet-connected hub, vendor-app onboarding and HA integration setup; electrical installation is outside this connection guide.
Lutron · manufacturer · Checked 2026-10-18
Visible US ordering scheme and White color code identify PD-6WCL-WH. This is not a retail-pack or Canadian-suffix equivalence assertion.
Source location: Model numbers and colors: PD-6WCL-(color code); Canada adds -C; WH is White
Lutron · manufacturer · Checked 2026-10-18
Model-family radio, hub/app relationship and original dimmer controls. Complete original 31-page PDF retained.
Source location: Printed pages 1-3 and 7: Clear Connect RF, Smart Hub/App, PD-6WCL model and physical dimmer controls
Lutron · manufacturer · Checked 2026-10-18
PD-6WCL physical controls, installation boundaries and Lutron-app setup. Complete original two-page PDF retained.
Source location: English page 1: model, warnings, using controls and smartphone/tablet setup
Lutron · manufacturer · Checked 2026-10-18
Exact White SKU PD-6WCL-WH, UPC 784276071987. Used only for identity, not current price or availability.
Source location: Printed page 14: exact PD-6WCL-WH row, separate from retail and multipack SKUs
Home Assistant · platform · Checked 2026-10-18
L-BDG2-WH/L-BDGPRO2-WH support, dimmable-light entities and Local Push.
Source location: Supported bridges; supported devices; Configuration; Manual hub configuration; Light; IoT class
Home Assistant · platform · Checked 2026-10-18
On/off and brightness actions; available attributes depend on the hardware integration.
Source location: State and attributes; List of actions
Home Assistant · platform · Checked 2026-10-18
Remote access is separately configured; local access is the default.
Source location: Opening explanation and Home Assistant Cloud/VPN options
Home Assistant · platform · Checked 2026-10-18
Host automations combine triggers, conditions and actions.
Source location: Parts of an automation; Action part
Lutron · manufacturer · Checked 2026-10-18
Activation requires Lutron account, current app, Internet and Ethernet/router; follow app/button prompts and allow updates.
Source location: Before You Begin; Setting up a new Caseta Smart Hub
Lutron · manufacturer · Checked 2026-10-18
Clear Connect connects the dimmer to the hub; Ethernet connects the hub to the router, not Wi-Fi.
Source location: What is the Caseta Smart Hub; standard and Pro model comparison
Lutron · manufacturer · Checked 2026-10-18
Vendor-managed hub firmware updates use Internet; this does not document dimmer firmware or a minimum HA-compatible version.
Source location: Overview; Firmware Update Process; Troubleshooting
Lutron · manufacturer · Checked 2026-10-18
Settings > Add Device and on-screen prompts add a Caseta device to the hub. No Apple HomeKit setup or reset procedure is adopted here.
Source location: Section 2, the specific Lutron-app Add Device instructions only
VZW31-SN · Smart Dimmers
LZW31-SN · Smart Dimmers
ZEN77 · Smart Dimmers
